Tarp Systems — Conventional Roll Tarp System


Cargo Control
Chains & Binders
Ratchets & Ratchet Straps
Rubber Tarp Straps
Corner Protectors
Coil Racks & Lumber
Tie Downs

Drop Tarps
Sidekit Tarps
Flat Tarps
Curtains/Room Dividers
Coil Bags/Coil Tarps
Other Custom Tarps
Patch Kits

Tarping Systems
RoadRunner Rolling Tarp
Roll Tarp Systems
Front-to-Back Cable Systems
Flip Systems/Pull Systems

Metal Products
Cab Guards/Bulkhead
Storage & Step Boxes
V-Racks for Sidekit Storage
Custom Metal Work

Dump Truck Accessories


About Us

Conventional Roll Tarp


Tri-County Tarp's Conventional Roll Tarp System consists of a heavyweight 22oz tarp that is held down perminanently on one side with ratched tie downs on the other. Traditionally there are aluminum end caps on each end. We also offer other cap variations when the traditional aluminum cap cannot be used.

Components of a Conventional Roll System include:

• Bows
• Bow Pockets
• 2 square aluminum end caps
• Roll Pipe
• Perm Pipe (Can be interchanged with Perm Strip)
• Quick Release Caddies which hold the perm strip
• Ratchets with straps
• Crank
• 22oz Conventional Roll Tarp
• Pullback Rope

Optional Features

Bow Cap

On dump trailers when an aluminum cap isn't an option, we instal a bow cap with matching tarp material.

Bow caps are used when a traditional aluminum cap cannot be used. Most often with dump trailers.

A bow cap consists of two bows with a plate welded between them which can serve as the purpose of a traditional aluminum end cap. Bow caps are covered with a matching vinyl material to blend in with your tarp.


Radius Aluminum Cap

Radius Caps, or Ravens Caps can be custom made to fit the trailer if desired.


Tail Options

• Wrap Tail
• Cut Out Tail
• Crap Flap; we can run a piece of vinyl the full length along the side of your tarp to prevent contents of trailer from spilling out.

13100 US. Route 23 • P.O.Box 600 • Bradner, Ohio 43406
Call 800-874-8277 • Fax 419-288-2372 • Email Sales@TriTarp.com